• Spectrometer Metal Analysis for Stainless Steel
  • Spectrometer Metal Analysis for Stainless Steel
  • Spectrometer Metal Analysis for Stainless Steel
  • Spectrometer Metal Analysis for Stainless Steel
  • Spectrometer Metal Analysis for Stainless Steel
  • Spectrometer Metal Analysis for Stainless Steel

Spectrometer Metal Analysis for Stainless Steel

Detector: Advanced CMOS Detector
Technological Level: International Standard
Analytical Method: Full Digital and Spectrum Direct Reading
CCD Pixel Resolution: 6pm
Grating Lines: 3000term/mm
Light Source Type: All New Adjustable Digital Light Source and Heps
Customization:

Contact Supplier

Diamond Member Since 2015

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company

Basic Info.

Model NO.
W5
Excitation Frequency
100-1000Hz
Vacuum System
Automatic Control and Monitoring Vacuum Software
Transport Package
Wooden Package
Trademark
wuxi jinyibo
Origin
Jiangsu Wuxi
HS Code
9027300000
Production Capacity
30 Sets/Month

Product Description

Specification
CMOS -based, spark discharge, metal detection
Ultra-low limits of detection
High integration, reliability, stability
Energy saving 50%, material saving
Lowing operating cost
Small size, light weight, easy to move and install
Multi-substrate upgrade easy, without changes to increase the hardware

Summary
W5 Optical Emission Spectrometer bring in the advanced technology from Europe. It is the 4th generation Arc/Spark-OES with high performance lowing operating cost for metal analysis and this is the latest research and development of detection equipment. The overall optical design has been enhanced, and with improvements of CMOS technology used to further improve the performance of the W5 while retaining the major benefit of earlier units. The CMOS spectrometer is not only contain the full spectrum characteristics of CCD spectrometer but also the extremely low detection limit for non-metallic elements such as C, S, P, B, As, N etc. The operation is simple and easy to learn. The test result is stable and accuracy. It is a good choice of all common metals for incoming and outgoing product quality control.

Application
W5 Optical Emission Spectrometer(spark OES) is used for applications in metal elemental analysis, trace element analysis for science and industry like Metallurgy, Foundry, Mechanical Engineering, Scientific Research, Product Inspection, Automobile, Petrochemical Engineering, Shipbuilding, Electrics, Aerospace, Nuclear Power, Metallic and Nonferrous Metallic Smelting, Processing and Recycling. It is including full element analysis range, but at same time the element analysis amount can be bespoke.

Detection Matrices:
Iron(Fe) and its alloys (Steel alloy, Cast iron, Fe-Low alloy, Fe-Cr steel, Fe-Cast iron, Fe-Cr-cast, Fe-Mn steel, Fe-Tool steel etc.)
Aluminium(Al) and its alloys (Al-Si alloy, Al-Zn alloy, Al-Cu alloy, Al-Mg alloy, Pure-Al alloy etc)
Copper(Cu) and its alloys (Brass, Copper-Nickel-Zn, Aluminum Bronze, Tin-lead Bronze, Red Copper, Be-Bronze, Si-Bronze etc)
Nickel(Ni) and its alloys (Pure Ni, Monel metal, Hadtelloy Alloy, Incoloy, Inconel, Nimonic etc)
Cobalt(Co) and its alloys (Co-orientation, Low Co alloy, Stellite 6,25,31, Stellite 8,WI 52, Stellite 188, F)
Magnesium(Mg) and its alloys (Pure Mg, Mg/Al/Mn/Zn-alloys)
Titanium(Ti) and its alloys
Zinc(Zn) and its alloys
Lead(Pb) and its alloys
Tin(Sn) and its alloys
Argentum(Ag) and its alloys
Small sample, special size sample and wire detection

Parameters
Item Index
Optical system
Optical structure The Paschen Runge construction full vacuum type optics system
Room temperature 35ºC±0.5ºC
Wavelength range 170-580nm
Focal length  400mm 
Grating line  3600m1/mm 
First order spectral line dispersion rare  1.2nm/mm 
Detector  Multi block high performance linear CMOS array  
Average resolution ratio  10pm/pixel 
Excitation table
Gas Rushing argon(99.999%)
Argon flow rate When excited: 3-5L/min
Standby time: no need for standby traffic
Electrode Tungsten electrode technology
Purge Automatic purge function
Make up Thermal deformation self-compensation design
Analyze the gap Sample stage:3.4 mm
Excitation light
Type HEPS
Frequency 100-1000HZ
Discharge current 1-400A
Special technology Optimization of discharge parameters design
Pre -combustion High-energy pre-combustion technology
Processor High end ARM, high-speed data synchronization acquisition and processing
Data collection system
Interface Ethernet data transmission based on DM9000A
Enter 220VAC 50/60Hz
The requirements of power and environment
Power Maximum:700W standby:40W
Working temperature 10-35ºC(temperature ≥5°C)
Working humidity 20-85%
Spectrometer Metal Analysis for Stainless Steel
Packing & Shipping
Spectrometer Metal Analysis for Stainless Steel
Spectrometer Metal Analysis for Stainless Steel
Spectrometer Metal Analysis for Stainless Steel
Spectrometer Metal Analysis for Stainless Steel
Spectrometer Metal Analysis for Stainless Steel
Spectrometer Metal Analysis for Stainless Steel



 

Send your message to this supplier

*From:
*To:
avatar Mr. Jerry Zhang
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now