Executive CMOS Optical Emission Spectrometer for The Determination of Aluminium

• Customization: Available
• Warranty: 1year
• Detector: Advanced CMOS Detector
• Model NO.: W5
• Technological Level: International Standard
• Analytical Method: Full Digital and Spectrum Direct Reading
• CCD Pixel Resolution: 6pm
• Grating Lines: 3000term/mm
• Light Source Type: All New Adjustable Digital Light Source and Heps
• Excitation Frequency: 100-1000Hz
• Vacuum System: Automatic Control and Monitoring Vacuum Software
• Transport Package: Wooden Package
• Trademark: wuxi jinyibo
• Origin: Jiangsu Wuxi
• HS Code: 9027300000
• Production Capacity: 30 Sets/Month
• Package Size: 128.00cm * 83.00cm * 95.00cm
• Package Gross Weight: 209.000kg

Product Description

Specification
CMOS -based, spark discharge, metal detection
Ultra-low limits of detection
High integration, reliability, stability
Energy saving 50%, material saving
Lowing operating cost
Small size, light weight, easy to move and install
Multi-substrate upgrade easy, without changes to increase the hardware

Summary
W5 Optical Emission Spectrometer bring in the advanced technology from Europe. It is the 4^th generation Arc/Spark-OES with high performance lowing operating cost for metal analysis and this is the latest research and development of detection equipment. The overall optical design has been enhanced, and with improvements of CMOS technology used to further improve the performance of the W5 while retaining the major benefit of earlier units. The CMOS spectrometer is not only contain the full spectrum characteristics of CCD spectrometer but also the extremely low detection limit for non-metallic elements such as C, S, P, B, As, N etc. The operation is simple and easy to learn. The test result is stable and accuracy. It is a good choice of all common metals for incoming and outgoing product quality control.

Application
W5 Optical Emission Spectrometer(spark OES) is used for applications in metal elemental analysis, trace element analysis for science and industry like Metallurgy, Foundry, Mechanical Engineering, Scientific Research, Product Inspection, Automobile, Petrochemical Engineering, Shipbuilding, Electrics, Aerospace, Nuclear Power, Metallic and Nonferrous Metallic Smelting, Processing and Recycling. It is including full element analysis range, but at same time the element analysis amount can be bespoke.

Detection Matrices:
Iron(Fe) and its alloys (Steel alloy, Cast iron, Fe-Low alloy, Fe-Cr steel, Fe-Cast iron, Fe-Cr-cast, Fe-Mn steel, Fe-Tool steel etc.)
Aluminium(Al) and its alloys (Al-Si alloy, Al-Zn alloy, Al-Cu alloy, Al-Mg alloy, Pure-Al alloy etc)
Copper(Cu) and its alloys (Brass, Copper-Nickel-Zn, Aluminum Bronze, Tin-lead Bronze, Red Copper, Be-Bronze, Si-Bronze etc)
Nickel(Ni) and its alloys (Pure Ni, Monel metal, Hadtelloy Alloy, Incoloy, Inconel, Nimonic etc)
Cobalt(Co) and its alloys (Co-orientation, Low Co alloy, Stellite 6,25,31, Stellite 8,WI 52, Stellite 188, F)
Magnesium(Mg) and its alloys (Pure Mg, Mg/Al/Mn/Zn-alloys)
Titanium(Ti) and its alloys
Zinc(Zn) and its alloys
Lead(Pb) and its alloys
Tin(Sn) and its alloys
Argentum(Ag) and its alloys
Small sample, special size sample and wire detection

Parameters

Item	Index
Optical system
Optical structure	The Paschen Runge construction full vacuum type optics system
Room temperature	35ºC±0.5ºC
Wavelength range	170-580nm
Focal length	400mm
Grating line	3600m1/mm
First order spectral line dispersion rare	1.2nm/mm
Detector	Multi block high performance linear CMOS array
Average resolution ratio	10pm/pixel
Excitation table
Gas	Rushing argon(99.999%)
Argon flow rate	When excited: 3-5L/min Standby time: no need for standby traffic
Electrode	Tungsten electrode technology
Purge	Automatic purge function
Make up	Thermal deformation self-compensation design
Analyze the gap	Sample stage:3.4 mm
Excitation light
Type	HEPS
Frequency	100-1000HZ
Discharge current	1-400A
Special technology	Optimization of discharge parameters design
Pre -combustion	High-energy pre-combustion technology
Processor	High end ARM, high-speed data synchronization acquisition and processing
Data collection system
Interface	Ethernet data transmission based on DM9000A
Enter	220VAC 50/60Hz
The requirements of power and environment
Power	Maximum:700W standby:40W
Working temperature	10-35ºC(temperature ≥5°C)
Working humidity	20-85%

Packing & Shipping